Medical ventilators: a breakdown of the components and sensors needed in essential medical care

Josh Brown
Product Manager at Distrelec

Josh Brown is passionate about equipping maintenance engineers and technicians with a portfolio of industrial automation components to improve connectivity, ensure energy efficiency and reduce downtime.

A form of life support treatment, medical ventilators are vital for assisting with a patient’s breathing when they are unable to breathe sufficiently on their own. They are used to:

  1. Get oxygen into a patient’s lungs and body
  2. Expel carbon dioxide from a patient’s lungs
  3. Ease breathing for those who can breathe on their own but struggle to do so
  4. Perform mechanical breathing for those who are unable to breathe on their own

Ventilator components

The basic components that are common to all ventilators include:

Sensors

Sensors act as quality monitors to ensure that the ventilator is operating efficiently and that the incoming air is at the correct composition for the patient. Characteristics such as pressure, volume and oxygen levels are all measured and monitored by sensors. Safety-critical, sensors are connected to printed circuit boards (PCBs) and controlled by software.

Essential characteristics monitored include:

  • Gas concentration

As ventilators are used to assist with breathing, a number of gases are inhaled and exhaled by the patient and may be required in different amounts. Where quantities of each gas are specified by a doctor, airflow sensors can be used to ensure that the desired and correct combination is delivered to the patient. This information is then measured and displayed on the ventilator panel.

  • Temperature

Installed directly into the air stream, thermistor sensing elements and packaged temperature probes are designed to monitor the air temperature. As sore throats can be caused by breathing in cold, dry air, ventilators try to mitigate this by using warm, moist air to help patients breathe more comfortably. By controlling and monitoring the temperature of the air delivery system, a desired level of warmth can be provided. This is achieved by using a microcontroller to measure and regulate the air stream temperature accordingly.

  • Pressure

To ensure that desired pressure levels are not exceeded, board mount pressure sensors can be used to measure air and oxygen pressure. Heavy duty pressure transducers are particularly useful where high pressure, steel pressure port interface and/or corrosive media are used.

  • Humidity

Capable of measuring the delivery of warm and moist air, humidity sensors enhance patient comfort. Having the ability to monitor any moisture in the air stream is essential for controlling moisture levels to maximise patient comfort.

Pneumatic circuits

Fundamentally, pneumatic circuits consist of the tube, fittings, in-line valves and regulators.

Regulators that are typically found in a ventilator include:

  • Expiratory pressure regulator (PEEP valve)

Maintains and controls positive airway pressure with carefully controlled expiratory flow obstructions that are usually in the form of a solenoid valve.

  • Inspiratory flow regulator

Ensures that the respiratory circuit receives the correct, prescribed gas flow. Typically, solenoid valves are used for this purpose and are located in front of the gas supply where they are best placed to ensure that patients only receive carefully measured amounts of gas.

Actuators

Actuators provide corrective action when measured parameters fall out of range. Typical examples of actuators within ventilators include pressure valves and flow control valves. Pressure regulators, for instance, are self-contained valves and actuator combinations that can be used to restrict and limit flow as required.

Consumables

Used by clinicians, consumables are parts that are disposed of after use. They include self-inflating bags, filters and adhesive tape.

Programmable logic controllers (PLCs)

Ideal for intelligent air control systems, PLCs optimise the efficiency of ventilation systems by monitoring and regulating according to demand and by providing corrective action as required. This is made possible with input and output (I/O) channels which are connected to sensors and actuators. Designed to operate automatically, many PLCs can also be configured for cleaning and maintenance.

Creative solutions for a common problem

Medical ventilators are a critical resource that are currently in short supply due to the Coronavirus pandemic. As these machines are vital to facilitate breathing for the sickest patients, meeting the increase in demand is essential. To meet this need, innovative engineers from a plethora of industries are pulling together to create ventilator parts. Whilst unfamiliarity with medical devices, closing of factories, delays with procurement, social distancing and time constraints are obstacles that need to be overcome, manufacturers are still volunteering to help by offering general purpose equipment and workshop space to aid the cause.

In the UK, the Department for Health and Social Care has started to provide ventilator blueprints to military engineers and car manufacturers. Manufacturers such as Fiat, Nissan, General Motors, Ford and Tesla have started converting their plants to help produce ventilators. Vauxhall have offered to help with the 3D printing of ventilator parts and several UK-based Formula One teams have mobilised their workforces to help with production.

Dyson, a manufacturer of vacuum cleaners, has also been working on this project, learning about the challenges in designing ventilators and finding solutions to manufacture the parts required.

The core challenge was how to design and deliver a new, sophisticated medical product in volume and in an extremely short space of time. The race is now on to get it into production

James Dyson, Owner of Dyson

Whilst this challenge is a huge one, engineers and manufacturers are striving to help, by using the resources that they have and exploring opportunities to use these creatively.

VT307 Poppet Type Valve

This 3 port direct operated poppet from SMC offers directly activated 3/2 directional seat valve for compressed air. Suitable as a switching or radio valve, this poppet has a soft sealing slider, universal porting type and provides low power consumption.

TruStability Board Mount Pressure Sensor

This Honeywell sensor is ideal for use with air and other dry gases. Offering operating temperatures of ±10 mbar, accuracy of 0.25%, sensitivity of 0.1% FSS and a broad temperature range from -40 °C to 85°C.

Total
0
Shares
Previous Post

Eliminating machine downtime: How AI is transforming maintenance

Next Post

Why companies are investing in automated maintenance technology

Related Posts